Acoustical Sealant : Box,4 tubes

Green Glue Noiseproofing Sealant

Green Glue Noiseproofing Sealant is an acoustical caulk used to fill gaps between walls and floors and around electrical outlets, light fixtures, windows, and doors. Anywhere there is a break in building material, acoustical sealant should be applied to stop sound from traveling through an open gap.

No special tools or skills necessary. Apply with a standard caulking gun in the same manner as normal caulk.

Green Glue Noiseproofing Sealant can reduce a project's noise transmission by 100 times or more. No soundproofing job is complete without it!

OL12-0201 - Reference wall before application of Green Glue Noiseproofing Sealant. STC 24
OL12-0202 - Reference wall after application of Green Glue Noiseproofing Sealant. STC 41

Green Glue Noiseproofing Sealant Installation Guide

NOTES
• Bonds to many surfaces including wood, gypsum, and concrete
• Apply with a standard (32-oz.) quart-size caulk gun.
• Apply in the same manner as applying regular caulk.
• While wet, Noiseproofing Sealant is easily cleaned with soap and water.
• Intended for interior use only.
• Not a finishing product; standard mud and tape should be used.
• Allow to dry 48 hours before finishing or painting.

STEP 1 - CLEAN THE SURFACE
Make sure all surfaces are dry and clean. Dust, dirt, moisture, etc. will prevent the acoustical caulk from bonding to the surface.

STEP 2 - PREPARING THE NOISEPROOFING SEALANT
Cut the tip of the tube to create an approximately 1/4" opening. Screw the nozzle on to the tip of the tube. Cut the tip of the nozzle to create an opening according to the size of the gap to be filled, not to exceed 3/8”.

Secure the tube in the caulk gun. Pull the caulk gun trigger to dispense the acoustical sealant.

STEP 3 - APPLYING NOISEPROOFING SEALANT
Apply sealant where needed. Use Green Glue Noiseproofing Sealant in the following locations:
• Gaps between walls and ceilings/floors
• Around windows and doors
• Around lighting fixtures
• Around electrical outlets
• Anywhere there is a gap in materials

STEP 4 - CLEAN UP
Immediately clean any excess sealant and any tools used with soap and water.

Downloads

For more details on Green Glue Noiseproofing Sealant please reference our PDF downloads below:

Review DataSheet

Review Installation Guide

Review UL Certification - Fire